Reention makes popular battery packs used by many different bike companies for their sleek, semi-integrated downtube design offering high capacity. They come in a variety of voltages and capacities. We can rebuild them all, often time upgrading your capacity to give you longer ride time!
These battery packs can be found on E-Joe, Volt Bike, Samson, Juiced, Surface 604, Smartmotion and FLX among others. Even if we don't have an online ordering link, contact us and we'll help you out. It doesn't matter if it's a 36V or 48V pack or what capacity it was to begin with.
All of our rebuilds are backed by our 12 month warranty. So if you're ready to get back on the road, send us your battery and charger with our Battery Intake Form and let us rebuild your battery.
52 comments
I have a battery from volt yukon 500 built 2015. My bike was stolen but I still have the battery and charger.is there a market to sell this on your site
@Rov – Yes, we can rebuild and upgrade the capacity of those packs.
Hi, I have a Reention Dorado 36V 12AH battery. It is not recharging. Looking to get it replaced or rebuilt. Can it be upgraded to higher capacity.
Thank you
Rov
@Larry – Usually an 11.6Ah battery can only be upgraded to 14Ah, but it depends on the case. We’ll be in touch regarding pricing.
I have an ebike with Retention battery with the numbers ABM9-4811-O-P-WP-QT-0151469
I believe it is a 48V 11.6AH.
What is the replacement cost for this battery and the cost of a 16AH or 17AH upgrade?
@Mike – Can you send us a picture of your battery and the screws you’re looking for? We can probably supply you with them.
I have a second-hand REENTION battery case that’s missing some of the screws that go from one side of the case to the other, they’re about 74mm long (3 inches perhaps) and have a tiny nut that fits into a hexagonal hole in the case. Do you know where I can purchase spare screws ???
@Tom – We don’t necessarily stock replacements, but we have some scrapped batteries we can salvage parts off of.
Hello! Do you have replacement parts for this battery case? I have a customer with a finicky switch on his Smartmotion battery. I am looking for a new end cap which has the board & switch to restore functionality. Smartmotion USA at one time told us this was due to a programming issue, the battery would not turn on due to some sort of protection circuit that was programmed with too low a threshold, but I feel some of them are just faulty switches?
@George – Typically we don’t change the voltage because that would require more changes in the electronics and could end up decreasing the overall capacity of the battery pack.
I read where you said you don’t recommend changing the voltage, but can you? Mine is on a BBSHD capable of more than 48 volts.
@Amine – We don’t recommend changing the voltage, but we can upgrade the Amp-hours.
I have a reention 48v 11amp can you upgrade to 52v and higher amps??
@Tyler – We do not sell keys for the mounting bracket. We only have the battery cases themselves.
do you sell keys for retention 48v down tube dorado?
@Richard – Yes, we can build the battery for you. Pricing depends on the size of the battery. We’ll be in touch with more info.